| MC33193 |
ARTSCHIP |
|
 MC33193.pdf |
The MC33193 device has been discontinued. Pin Compatible with the industry stanard UAA1041 It was developed for enhanced EMI sensitivity, system reliability, and improved wiring simplification. The MC33193 is pin compatible with the UAA1041 and UAA1041B |
|
| ICL7106 |
ARTSCHIP |
DIP40 |
icl7106.pdf |
The Intersil ICL7106 and ICL7107 are high performance, low power, 31/2 digit A/D converters. Included are seven segment decoders, display drivers, a reference, and a clock. The ICL7106 is designed to interface with a liquid crystal display (LCD) and incl |
|
| MC33035P |
ARTSCHIP |
|
MC33035-D.pdf |
The MC33035 is a high performance second generation monolithic brushless DC motor controller containing all of the active functions required to implement a full featured open loop, three or four phase motor control system. This device consists of a rotor |
|
| LM311 |
ARTSCHIP |
DIP-8 SOP-8 |
|
The LM111, LM211 and LM311 are voltage comparators that have input currents nearly a thousand times lower than devices like the LM106 or LM710. They are also designed to operate over a wider range of supply voltages: from standard ?à15V op amp supplies d |
|
| LM339 |
ARTSCHIP |
|
lm339.pdf |
The LM139 series consists of four independent precision voltage comparators with an offset voltage specification as low as 2 mV max for all four comparators. These were designed specifically to operate from a single power supply over a wide range of volt |
|
| SA571D |
ARTSCHIP |
DIP16,SOP16 |
SA571.pdf |
The SA571 is a versatile low cost dual gain control circuit in which either channel may be used as a dynamic range compressor or expandor. Each channel has a full-wave rectifier to detect the average value of the signal, a linerarized temperature-compens |
|
| LM386 |
ARTSCHIP |
SOP,DIP... |
LM386.pdf |
The LM386 is a power amplifier designed for use in low voltage consumer applications. The gain is internally set to 20 to keep external part count low, but the addition of an external resistor and capacitor between pins 1 and 8 will increase the gain to |
|
| KA2411 |
ATSCHIP |
|
ka2411.pdf |
The KA2410/KA2411 is a bipolar integrated circuit designed for telephone bell replacement. |
|
